Get in touch

Are you interested in our products or services? Contact us immediately, our experts will provide you with professional services!

*Please leave your specific personal information, and we will have a product consultant contact you later

Submit
%{tishi_zhanwei}%
WXJF-S Partial Discharge Analysis Testing Equipment
+
  • WXJF-S Partial Discharge Analysis Testing Equipment

WXJF-S Partial Discharge Analysis Testing Equipment


Display: 4.0inch RGB LCD screen Headphone: 8ohm minimum Controller: ARM Sensor transmission impedance: 5mV/mA TEV Measurement range: 0-60dBmV UHF Detection frequency band: 300~1500MHz

Belongs to category: Partial Discharge Test System

Product Introduction

WXJF-S is widely used in the partial discharge detection of power systems. Including high voltage switchgear, ring mains, voltage/current transformer, transformer (include dry type transformer), GIS, overhead lines, cables, and other equipment insulation state detection.

The following indicators are used to measure the degree of discharge of electrical equipment:

Partial discharge intensity detection: By measuring the discharge signal in a power frequency cycle, the intensity of the partial discharge is characterized according to the maximum value (dB) in the discharge pulse sequence.

Partial discharge frequency detection: The device measures the discharge signal within a power frequency cycle, extracts the discharge pulses and characterizes the frequency of partial discharges according to the number of discharge pulses.

Product Characteristics

● With different sensors to achieve partial discharge detection of almost all electrical equipment.

● Provide multiple discharge patterns such as time-domain waveform, PRPD, PRPS, etc., to realize the analysis of different discharge types.

● User-friendly man-machine interface facilitates the data management of different devices, including the traceability of historical data change trends, horizontal and vertical data analysis, and realizes a 360° comprehensive diagnosis of the tested device.

● Built-in ultrasonic sensor and transient earth voltage (hereinafter referred to as TEV) sensor, also can be connected to external special sensors for transformers, GIS, overhead lines, and cables.

● It adopts non-intrusive detection method, no need to power off during the test process, no need to configure additional high voltage source, it is more convenient to use than traditional pulsed partial discharge detector.

● The test bandwidth range is 30kHz ~ 2.0GHz, suitable for detection principles of various frequency bands.

Product Parameters

TEV MeasurementUHF Measurement
Measurement range0-60dBmVDetection frequency band300~1500MHz
300~1500MHz1dBMeasurement range-75-0dBmV
Accuracy±1dBAccuracy<1dBmV
Max. pulse per cycle1400Sensor frequency band300-2000MHz
Measurement frequency band1~100MHz  
AA measurementAE measurement
Measurement range-6dBμV~68dBμVMeasurement range -6dBμV~68dBμV
Resolution1dBResolution1dB
Accuracy±1dBAccuracy±1dB
Sensor center frequency40kHzFrequency range40-200kHz
HFCT measurement
Sensor transmission impedance5mV/mA
Detection frequency1~30MHz
Sensitivity≤50pC
Hardware
ShellABS
Display4.0inch RGB LCD screen
ControllerARM
ConnectorUSB interface (charger port), Wireless WIFI
3.5mm stereo headphone jack, Wireless synchronization benchmark
External ultrasonic sensor input
Headphone8ohm minimum
SD cardStandard 16G
Built-in battery3.7V/1Ah lithium battery
Working timeAbout 8 hours
ChargerAC 90-264V or DC 5V
Working temperatures-20~+50℃
Humidity20~85% relative humidity
Dimension, weight210*100*35(mm), 0.4kg (main unit)

Packing List

Main unitStandard
External Contact ultrasonic sensorFor option, used for transformers, GIS, motors
UHF sensorFor option, used for GIS
HFCTFor option, used for power cable
Test cableStandard
ChargerStandard
USB cableFor charging and PC communication
User’s guide 
Factory test report 

FAQ

1.When can I get the price?

We usually quote within 6 hours after we get your inquiry.

If you are very urgent to get price, please call us or tell us in your email so that we will regard your inquiry priority.

2. What about the leading time for production?

Honestly, it depends on the order quantity and the product. Usually our leading time is within 7 working days after order confirmed.

3. What is your payment terms?

We accept EXW,FOB, CFR, CIF, ect. You can choose the one which is the most convenient and cost effective for you.

4. How much will be the Shipping cost and time?

This will depend on the size of your goods and the method of shipping (by sea/ by air/by Express) and your designated port or airport. We will be grateful if you can spare us some minutes to evaluate the cost based on the information provided.

5. Could you please tell me the Warranty Period of your product?

Our warranty period is one year free and lifelong maintenance. If the product is damaged (if not man-made damage), in the first year,we will send free parts for replacement. Over  warranty, maintenance is paid service.

6. What kind of Certificate can you provide?

We can provide the CE mark, ISO 9001 quality certificate, third party calibration certificate(CNAS) and factory test report.

7. Do you have Technical Backup to all customers from different countries?

To be sure,our technical support is always available and quick response.
We are manufacturer with much on-site testing experience, thus we know how to deal with your problems. Moreover, our engineers can go to your country to support if need.

Keywords: WXJF-S Partial Discharge Analysis Testing Equipment

Product Inquiry

Leave the information you want to consult, and we will contact you as soon as possible

Inquiry